Call us at :SPM Hydraulic Machine
These SPM Lathe Machines are available with or without Hydraulic Copying System. Machines are suitable for job where simultaneous Facing and OD Turning or OD Turning and lD Turning or Facing and lD Turning required excluding holding portion. Mostly these machines are used on Tie Rod Housing, Gear Blanks, Sprockets, and Bearings etc. Machines are suitable for mass production of items economically. Machines are highly productive with ease in operation and maintenance. View more.....
CNC FBM-150
Computer numerical controlled (CNC) lathes are rapidly replacing the older production lathes (multispindle, etc.) due to their ease of setting, operation, repeatability and accuracy. They are designed to use modern carbide tooling and fully use modern processes. The part may be designed and the tool paths programmed by theCAD/CAM process or manually by the programmer, and the resulting file uploaded to the machine, and once set and trialled the machine will continue to turn out parts under the occasional supervision of an operator View more.....
FLY-ASH Bricks machine
Pressing Capacity depand on Machine model, Heavy Duty and noice less, Hydraulic power pack according to machine model, Belt conveyor according to machine model, PLC Based control panel, Best companies accessories View more.....
Auto Lathe Machine
S Mechanicals offers auto lathe for bearing rings that are based on modular concept with automatic loading/unloading. This auto lathe machine is suitable for bearing components or small disk type chucking parts. The auto lathe machine for bearing rings can also be used to form a line of machines producing turned part from blank with minimal operator intervention when inter linked with work indexing mechanisms. View more.....
| Capacity | |
| Std. Turning Dia | Ø150mm |
| Max. Turning Dia | Ø160mm |
| Max. Turning Length | 100mm |
| Slide | |
| Cross (X axis) Travel | 400mm |
| Longitudinal (Z axis) Travel | 200mm |
| Rapid Feed | 24mm/min |
| Ball Screw | X, Z axis Ø32x10P |
| Motor Torque | 7.7NM |
| Main Spindle | |
| Spindle Motor | 7.5kw |
| Spindle Bore | Ø38mm |
| Spindle Nose | A25 |
| Chuck Size | Ø165 |
| Speed Range | 50-4000RPM |
| Tooling Arrangement | |
| No. of Tools | 4 |
| Tool Size | 25x25mm |
| Max. Boring Bar Capacity | Ø32mm |
| Weight (Approx) | 2100kg |
| Machine Dimensions | 2290x1440x1675 |
| Accuracy | |
| Positioning Accuracy | 0.008 |
| Repeatability | ±0.003 |
| Control System | Siemens 808 D or as per Req. |
Standard Features
Calibrated Axes High Precision Accuracy & Repeatability
Graphic Simulation & Electronic Hand Wheel
Set of Reduction Sleeve for Boring Bar
Work Light, Linear Motion Guide Ways
Centralized & Programable Lubrication
Auto & Manual Coolant System
Tool Holders